About us   |    Materials science   |    Products   |    Contact   |    German version Group: rubber-metal ¬ RM suspension mounts ¬ RM bushes ¬ RM cones ¬ RM bearing blocks ¬ RM machine mounts ¬ RM buffers    ¬ Type A    ¬ Type B    ¬ Type C    ¬ Type D    ¬ Type E    ¬ Parab. cross-section    ¬ Enlarged end plates ¬ RM rings ¬ RM bars ¬ Rubber buffers Group: polyurethane Group: mouldings Group: stampings Group: transformer oil resist. rubber parts Product range A-Z Application examples Request quote STALASTIC: Buffers made of rubber and metal with enlarged end plates These STALASTIC buffers feature a waisted rubber contour that is narrower than the end plates. They have a good fatigue strength even under high dynamic peak loads. Since the very dangerous peak loads are avoided at the edges of the end plates, these buffers are less affected by tensile stress than the normal cylindrical type of metal-rubber rubbers. Rubber hardness grades used: hard: approx. 70 Shore A medium: approx. 60 Shore A soft: approx. 45 Shore A